Share your experience!
I have just purchased a new Sony KDL-46W905A today. I cannot get the Netflix app to connect. I click on app and it gives me error NW4-8. I have been in contact with Netflix and they can't even sort it. Internet is fine - just can't connect to Netflix servers. Has anyone any ideas it's driving me nuts
Solved! Go to Solution.
That's in my list of things I tried... did it twice, didn't work for me 😞
@Anonymous
Hi! No, I'm in Sweden and my ISP is Ownit. My router is an Apple Time Capsule. Are they known for causing these issues?
Hi there
Not heard of issues with Apple Time Capsule, but then again no one has posted on this forum in regards to it either
A suggestion: try using the manual network settings on the TV, and use Googles DNS Servers
Primary = 8.8.8.8
Secondary = 8.8.4.4
Cheers
@Anonymous
Tried manual over wired network but doesn't seem to work either, same error as always, can't connect to any of the Netflix servers.
Tried directly connecting the network to the TV, but I don't have a static IP address so didn't get it to work. I use DHCP in the router.
Im at a loss on what else to suggest to be honest - as you have done alot of troubleshooting already. Id say contact Sony support, but in previous cases, Sony blames Netflix and Netflix blames either Sony or ISP 😞
On a side note, many routers allow you to set a range of IP addresses for the DHCP pool. For me, i lhave the following, and then my statics start from the 100 range. An option??
Hi,
I bought a KDL40W705C about a month ago, has been working fine with Netflix, iplayer etc.
Received a update last night, and now none of the streaming services work.
Press the Netflix button on the remote, and nothing happens. Except then none of the buttons on the remote do anything, including the standby button. The only solution is to switch off at the plug.
If I access Netflix or iplayer through the apps menu, I get the splash screen and then the TV restarts itself.
The software version shows 8.062-1000-1.082-01, and the model number shows KDL-40WD653 (which is different from the receipt, which say KDL40W705C).
Hi krs360
It seems you have two issues - what model tv you have and TV restarting itself.
TV Model:
I believe you have the WD model. To confirm this: Press the [HELP] button on the remote control and the scroll down to "System Information"
TV Restarting:
As the 2016 WD models have received an update just recently, can you please do a factory reset as this can clear many issues. See instructions HERE
Cheers
@Quinnicus wrote:Hi krs360
It seems you have two issues - what model tv you have and TV restarting itself.
TV Model:
I believe you have the WD model. To confirm this: Press the [HELP] button on the remote control and the scroll down to "System Information"
TV Restarting:
As the 2016 WD models have received an update just recently, can you please do a factory reset as this can clear many issues. See instructions HERE
Cheers
Factory reset didn't help, have already tried this. Have also reset all network equipment.
Is it possible to roll back the firmware to the previous version?
I do have the WD version, the shop supplied the wrong TV.